Datamax-oneil S-Class User Guide Bedienungsanleitung PDF herunterladen (Seite 42)

34 S-Class

The table below lists the default settings, according to the printer model, for each Stock ID number.

Stock ID Default Settings

Print Width

Stock ID

3210 Models 3306 Models

Start of Print

Position

Cut/Tear

Position*

0 3.15" (80.0 mm) 3.20" (81.3 mm) .07" (1.8 mm) .05" (1.3 mm)

1 3.15" (80.0 mm) 3.20" (81.3 mm) 4.28" (108.7 mm) 4.26" (108.2 mm)

2 3.15" (80.0 mm) 3.20" (81.3 mm) 1.67" (42.4 mm) 1.65" (41.9 mm)

3 3.15" (80.0 mm) 3.20" (81.3 mm) .02" (.5 mm) 0

4 1.89" (48.0 mm) 1.81" (46.0 mm) .02" (.5 mm) 0

5 1.89" (48.0 mm) 1.92" (48.8 mm) 4.33" (110.0 mm) 4.30" (109.2 mm)

6 1.89" (48.0 mm) 1.92" (48.8 mm) 1.70" (43.2 mm) 1.67" (42.4 mm)

7 1.89" (48.0 mm) 1.92" (48.8 mm) 1.45" (36.8 mm) 1.42" (36.1 mm)

8 2.20" (55.9 mm) 2.24" (56.9 mm) .07" (1.8 mm) .05" (1.3 mm)

9 3.15" (80.0 mm) 3.20" (81.3 mm) 0 0

*SV Model printers using the Tear Bar must add .07 inch (1.8mm) to these distances for Top Plate clearance of the ticket.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Keine Kommentare

Datamax-oneil S-Class User Guide Bedienungsanleitung Seite 42