Datamax-oneil S-Class User Guide Bedienungsanleitung PDF herunterladen (Seite 54)

46 S-Class

4.4.4 Ticket Detect Sensor Cleaning

The Ticket Detect Sensor initiates the auto-loading process by signaling

the presence of ticket stock within the Media Guides. If the sensor

becomes blocked with paper particles, ticket feeding problems can occur.

Clean the sensor as follows:

 Turn ‘Off’ and unplug the printer. (ST Models: Raise the access

cover; see Section 3.2.)

 Slide the printhead latch to the ‘unlocked’ position and raise (or, in

the case of SV Models, lower) the printhead assembly (see Section

4.4.1).

 Remove any ticket stock.

 Lower (or raise) the printhead assembly and slide the printhead latch

into the ‘locked’ position.

 Using compressed air, direct an air stream under the area indicated

by dotted line in the drawing below to clean the sensor.

Media Guide

Ticket Detect Sensor

(located under the Media Guide)

Use compressed air here

 Plug in and turn ‘On’ the printer. Load ticket stock; see Section 3.2.

ST Models: Close the access cover. This completes the procedure.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 91 92

Keine Kommentare

Datamax-oneil S-Class User Guide Bedienungsanleitung Seite 54