Datamax-oneil DPL Programmer’s Manual Bedienungsanleitung PDF herunterladen (Seite 281)

Appendix S – RFID Overview

273

Field Valid Inputs Meaning

1, 2, and 3

Operation to perform, where:

1 = Read (report to host)

2 = Write

3 = Write w/ Read back and Verify

bbb

Wnx RFID Hexadecimal Operation, where no “n” is an implied 1.

0 Not Used, should be 0

eee

xyy

HF: Lock after write, where:

x = 0 – Use printer setup to determine if lock is performed.

x = 1 – Lock after write.

yy = Not Used

UHF EPC Gen2: Lock after write, where:

x = 0 – Use printer setup to determine if lock is performed.

x = 1 – Lock after write.

yy = Lock state where “01”is permalock, “10” is pwd-write

lock or “11” is both states

UHF other tag types: Not Used, should be 000

ffff

0000 – 9998

HF: Starting block number to write.

UHF EPC Gen2: Block address where “0001” is EPC data, “0002”

is Tag ID or “0003” is user memory. Using “0000” is for EPC

data also (for backwards compatibility).

UHF other tag types: Not Used, should be 0000

gggg

0000

HF: Not Used, should be 0000

UHF EPC Gen2: Data word offset – currently only used for read

operation

UHF other tag types: Not Used, should be 0000

jj…j

Valid hexadecimal

pairs per character

followed by a

termination

character.

Data to write to the tag.



UHF data length must be 16 or 24 for EPC, 16 for Tag ID or

multiples of four for user memory sections.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 295 296

Kommentare zu diesen Handbüchern

Keine Kommentare

Datamax-oneil DPL Programmer’s Manual Bedienungsanleitung Seite 281

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucker Datamax-oneil DPL Programmer’s Manual