Datamax-oneil DPL Programmer’s Manual Bedienungsanleitung PDF herunterladen (Seite 91)

Extended System-Level Command Functions

Value Units / Interpretation RFID Configuration Definition / Function

where n:

64 = 64-bit

96 = 96-bit

Sets the UHF tag data size (Multiprotocol UHF only).

Pxxx

where xxx: 3-Digit Value

Sets the tag encoding position: A value of 0.00 causes the print position to be

used; or, a value greater than 0 causes the presented position to be used.

(Subject to change.)

where n: 0 – 9 Sets the number of retries for RFID functions.

Shh

where hh: 2-Chararacter Hex ID

Sets the Electronic Article Surveillance (EAS) set, representing the

manufacturer’s code (HF only).

where n:

0 = ISO 15693,

1 = Texas Instruments,

2 = Philips,

3 = ST Micro LRI 512,

4 = ST Micro LRI 64

Establishes the tag type (HF only).

where n:

0 = EPC 0

1 = EPC 0+ Matrics

2 = EPC 0+ Impinj

3 = EPC 1

6 = UCODE EPC 1.19

7 = EM 4022/4222

8 = Gen 2

Sets the UHF tag type (Multiprotocol UHF only).

where n: -4 to +4 Adjusts the power, in dBmn (Multiprotocol UHF only).

where n:

E = Enable,

D = Disable

Allows locking the tag after writing.

Example: <STX>KcRIMH;RIA11E;RID22E;RIS04;RIR3;RIWE;RIEE;RIP000<CR>

The above example sets the printer to HF, protect after write AFI 11, protect after write DFSID 22, set EAS Bit (Mfg. Code

0x04), allow 3 tries for each read or write attempt, lock after writing, erase the tag if there is an error, and use a position of

0.00.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 295 296

Keine Kommentare

Datamax-oneil DPL Programmer’s Manual Bedienungsanleitung Seite 91