Datamax O'Neil H-8308P Betreibershandbuch PDF herunterladen (Seite 63)

4.3.16 Tools

Select from the following options to adjust the appropriate settings:

• Calibrate

• Security

• Maintenance

• User Files

• Date/Time

Calibrate

The Calibrate settings include:

• Calibrate Sensors

• Calibrate Paper

• Calibrate Manually

• Calibrate Display

Calibrate Sensors

Select Calibrate Sensors to automatically calibrate the printer without print media. Calibration includes

changes to the following settings:

• Top-of-Form Sensor

Note: The print media must be removed and the printhead mechanism must be unlatched for the

Calibrate Sensors to properly calibrate the printer.

Calibrate Paper

When selecting Calibrate Paper, the paper is scanned to determine the top-of-form media and top-of-

form gap settings.

Upon selection, the printer will move the paper forward and backward over the gap or mark. It may be

helpful to place the identifying mark or notch just behind the TOF sensor so that the sensor will go over

the mark as the media progresses through the printer.

Calibrate Paper is intended to sample paper with the default size of 4” x 4”. If a 4” x 6” label is used

for calibration and the TOF sensor is placed just after the identifying mark or notch, it may not calibrate

properly because it is designed to move the paper only 4”.

Note: Print media must be properly installed in the printer for the Calibrate Paper function.

Note: Manually selecting Calibrate Paper is not necessary if Auto Calibration is enabled. However, it may

help in calibrating more difficult media.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 115 116

Keine Kommentare

Datamax O'Neil H-8308P Betreibershandbuch Seite 63